Vertical Foldable FFP1 Dust Mask Environment Friendly With Latex Free Elastic Strap

• Material:	Non Woven Fabric	Color:	White
  Name:	FFP1 Dust Mask	Expiry Date:	5 Years
  Active Carbon:	No	Feature:	Environment Friendly
  High Light:	ffp1 face mask ,  non woven face mask

• Vertical Foldable FFP1 Dust Mask Environment Friendly With Latex Free Elastic Strap

• 
  1 . Descriptions 
   
  FFP1 Vertical Foldable Dust Mask use latex-free elastic strap , soft nose liner , softer and fit the face,adjustable aluminum nose clip will make wearing more sealless leakage .These respirator are CAT.III Personal Protective Equipment(PPE) according to Annex I of Regulation EU 2016/425. This PPE offers protection against risks of death or serious and permangent injury.It is assumed that the person using the PPE does not have the possibility of instantly verfying any harmful effects.

•  

•  2. Certification
   

• This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking. It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.

• EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

•  

• 3. How to use?

• Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.

• Hold respirator under chin,with nose piece up

• Locate the upper strap across the crown of the head and the lower strap below the ears.

• Strap must not be twisted.

• Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.

• The seal of the respirator on the face should be fit-checked before entering the workplace.

• If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.