Convenient FFP1 Dust Mask PP Non - Woven Fabric Material Non - Irritating To Skin - Manufacturers, Suppliers - Factory Direct Wholesale Made in China- XTNU, PPE Products & More

Commodity Information

Material:	Non Woven Fabric	Color:	Gray
Valve:	Yes	Expiry Date:	5 Years
Active Carbon:	Yes	Function:	Anti-dust
High Light:	ffp1 face mask , dust face mask

Convenient FFP1 Dust Mask PP Non - Woven Fabric Material Non - Irritating To Skin

1 . Descriptions

Fabric: PP non-woven fabric
Form fitting design; Soft non-irritating to skin
Static dealt filter lays, efficiently filtrate & absorb industrial toxic dusts, Fumes, mists, gases and vapors against silicosis.
Soft nose foam and adjustable nosepiece ensures custom shape and increase the workers' comfort and acceptance
Excellent water repellent and air permeability
Fringe seal avoids open layer around the edges
Maintenance/cleaning free, convenient to use.

2 . Mask CE Quality Standards

CE Standard for Disposable Respirators
EN: 149:2001 + A1:2009
Distinguish	Filter Efficiency	Penetration	Resistant
FFP1 NR	≧80%	< 20%	< 21mmH₂O
FFP2 NR	≧94%	< 5%	< 24mmH₂O
FFP3 NR	≧99%	< 1%	< 30mmH₂O

  1 . Stardard : EN : 149 : 2001 + A1 : 2009
  2 . Test Machine : TSI 8130
3 . Test Flow : 95Liters/Min
   4 . Test Medium : NACL & DOP

3 . Certification

This product has been tested according to the following European Standard:

EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

4. How to use?

Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
Hold respirator under chin,with nose piece up
Locate the upper strap across the crown of the head and the lower strap below the ears.
Strap must not be twisted.
Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.
The seal of the respirator on the face should be fit-checked before entering the workplace.
If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.