Eco Friendly Disposable Dust Mask , Dust Mask Respirator FFP1 Melt Blown Filter

Commodity Information

Material:	Non Woven Fabric	Color:	White
Valve:	Yes	Expiry Date:	5 Years
Active Carbon:	No	Name:	Disposable Dust Mask
High Light:	ffp1 face mask , non woven face mask

Eco Friendly Disposable Dust Mask , Dust Mask Respirator FFP1 Melt Blown Filter

1 . Descriptions

FFP1V Dust Mask with adjustable aluminum nose clip makes wearing more seal less leakage .

With latex-free elastic strap , soft nose liner , softer and fit the face .

Easy-breathing valve makes breathing more smooth .

2 . Material of each layer

Outer layer : Protective PP spun-bonded non-woven

Middle layde : FFP1 melt blown filter(have filter efficiency level of 80%)

Inner layer : Shaped needle punched cotton

3 . Mask CE Quality Standards

CE Standard for Disposable Respirators
EN: 149:2001 + A1:2009
Distinguish	Filter Efficiency	Penetration	Resistant
FFP1 NR	≧80%	< 20%	< 21mmH₂O
FFP2 NR	≧94%	< 5%	< 24mmH₂O
FFP3 NR	≧99%	< 1%	< 30mmH₂O

1 . Stardard : EN : 149 : 2001 + A1 : 2009

2 . Test Machine : TSI 8130

3 . Test Flow : 95Liters/Min

4 . Test Medium : NACL & DOP

4 . Features

- light weight, convenient for carry
- non-woven fabric material
- Adjustable nose clip
- High efficiency filter layer with advanced electrostatic charged microfibers
- Latex-free, free optional for with/without active carbon, with/without valve
- breath easy and eliminate the exhaust gas in mouth

5 . Directions for use

The mask is for single use only.
The mask should not be removed from its packaging until its required for use.
Use the respirator in accordance with applicable health and safety regulations.
Fit the respirator and check leak-tightness before entering the contaminated area.
Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.
If maintained as per storage instructions , product can be used up to 5 years from date of manufacture.